call : 086-5333409
Line ID : @top_speed 
Email : motionproasia@gmail.com
Hand Winch (Belt) 1600lb / รอกมอหมุน แบบเชือกเบล 1600lb (727kg)
Hand Winch – 1600LB (รอกมือหมุน ขนาด 1600LB)
Specification
Model: Hand Winch 1600LB
Rated Pull (LBS/KG) : 1600(720)
Gear Ratio: 4.3:1
Handle Length (mm): 225
Drum-Hub Dia (mm): ɸ21
Belt Size (mm): 2mm x 50mm x 8m
Box Size: 22x15x18 cms.
User’s manual:
1. Ratchet Switch – There are 3 positions for this ratchet switch: The higher position is for pulling, the lower position is for releasing, the middle position is for both pulling and releasing but can only be used when unloaded. When the winch is loaded, hold the crank handle tightly if you want to change the switch position.
2. Before using, install the winch on a firm and flat surface. To install it, put the ratchet switch on the middle position and pull the cable out until the holes on the bottom of the base are visible, Then use at least 3 sets of 3/8” bolts and locking nuts, in a triangle pattern, to fix the base on the surface. Use an extra metal or hardwood board when necessary.
3. Then install the crank handle to the axis bolt with nut.
4. Put the ratchet switch on the higher position and trun the crank handle clockwise to pull. Put the ratchet switch on the lower position and turn the crank handle counterclockwise to release.
Caution:
1. Never Overload.
2. This winch is designed for pulling, not for lifting.
3. Never put your hand or anything else near the gear, rim and rolling cable, Always wear gloves when using the winch.
4. Never try to repair or disassemble the winch when there is a problem. Ask and machinist or specialist for help.
5. When replacing the cable, make sure that the end of the cable comes through the 4 holes on the side of the rim, and tie a knob or weld the end tip of cable to the cable, to prevent the cable from coming out.
6. Use grease for axis and gears before depositing for a long time.
สั่งซื้อ / BUY